Epson Stylus Photo R320 Service Manual page 10

EPSON Stylus Photo R320
Maintenance
Printer status
LED indication
Ink Out Error On
No Ink Cartridge Blink
TROUBLESHOOTING
Table 1-3. LED/LCD Indication and STM3
LCD indication
Ink out
Black: T0481
For best results, use genuine EPSON
ink.
Ink cartridges cannot be recognized
Cyan: T0482
For best results, use genuine EPSON
ink.
Ink cartridges cannot be recognized
Light Cyan: T0485
For best results, use genuine EPSON
ink.
Troubleshooting with LED/LCD Indications and Status Monitor 3 Message
STM3 message
This error is detected in either of the following
cases.
1. The ink consumption reached 100%.
2. The Ink Cartridge is faulty. (CSIC memory
(Note)
Even in the Ink Out Error status, a small amount
of ink still remains in the Ink Cartridge to
protect the Print Head from printing without
ink.
This error is detected when the Ink Cartridge
has not installed, or not installed properly.
This error is detected when the printer cannot
read and write the CSIC information of the
installed Ink Cartridge.
Revision B
Condition for error detection
data error)
10