Directed Electronics Python 3000 ESP Installation Manual page 4

IMPORTANT! Never interrupt any wire other than the starter wire.
H1/2 WHITE (+/-) SELECTABLE LIGHT FLASH OUTPUT
As shipped, this wire should be connected to the (+) parking light wire. If the light flash polarity jumper under
the sliding door is moved to the opposite position (see Internal Programming Jumpers section of this guide), this
wire supplies a (-) 200 mA output. This is suitable for driving (-) light control wires in vehicles such as Toyota,
Lexus, BMW, some Mitsubishi, some Mazda, and other model cars.
(+) LIGHT FLASH OUTPUT
(-) LIGHT FLASH OUTPUT
H1/3 WHITE/BLUE (-) 200 mA CHANNEL 3 PROGRAMMABLE OUTPUT
This wire provides a 200 mA (-) output whenever the transmitter button(s) controlling Channel 3 is pressed. This
output can be programmed to provide the following types of output (also see System Features Learn Routine
section of this guide):
4
© 2001 Directed Electronics, Inc. Vista, CA