Dust Sensor Cleaning; Alarm Function - ECOVACS Deebot D54 User Manual

Dust sensor cleaning

11.Alarm function

Icon Cause of failure
1. Dust box is not
fixed into host.
2. Dust box is not
fixed properly
1. Main brush or
driving wheel is
tangled by hair or
cloth.
2. Side brush is
blocked.
Driving wheel is
suspended.
Low battery.
19
The dust sensor is located at the front of dust
entrance. It is able to detect the concentration of
dust so that it can choose efficient mode to work.
We suggest you to clean dust sensor once you
clean dust box to improve work efficiency.
1. Turn off power.
2. Take out dust box and clean it.
3. Wipe the dust sensor with dry cotton cloth.
Note:
The robot will stop working and be alarm and tip sound at the
same time. Please do as belowing to solve the problem.
Solution
1. Put dust box back
into host.
2. Re-install dust
box and press it
.
down at the same
time.
1. Clean main brush.
2. Clean side brush
and put it back.
Put the robot at the
even ground.
Put the robot back
.
manually
Instruction
This function can prevent danger of child or
pet lifting the robot when it is operating.
Yellow indicator means that the robot starts
to look for the charging block.
Red indicator means that the lower battery
level, and please put the robot to the
charging block manually.