Pre-Operation Inspection; Engine Oil Check - Hyundai HCP9100 User Manual

3.0 Pre-Operation
Inspect all components for damage and to ensure that none are missing. If
you require a replacement, do not operate this machine until all parts are
present and in proper working order.
Do not modify or create accessories for this equipment. Using modified
components may result in damage to this equipment and may void the
warranty. Contact customer service if you suspect that this equipment has
been tampered with.

3.1 - Engine Oil Check

1. Ensure the Air Compressor is on a level surface.
2. Inspect engine oil:
• Take out the oil filler cap and clean the dipstick.
• Check the oil level by reinserting the oil filler cap without rotating it.
Remove the oil filler cap and examine the oil level. If the oil level is at
or below the lower level, refill the oil to the upper limit mark. (10W30)
Reinsert the oil filler cap and tighten securely. (Refer to figure)
Engine oil is a major factor affecting engine performance and service life. Non-
detergent or vegetable oils are not recommended.
16