Table of Contents
Advertisement
NTI SERIMUX SERIES CONSOLE SWITCH
The Change Serial Settings page provides boxes that can be edited with the serial communication characteristics associated with
each port. The characteristics that can be changed include:
Setting
Baud Rate
Data Bits
Stop bits
Parity
Flow Control
Xon Character
Xoff Character
DTR Line Behavior
Inter Character Delay
Break Receive Allowed
Break Transmission Duration
Once the desired changes have been made, press the "Apply" button to save the values. The changes will take effect
immediately.
Figure 42- Change Serial Settings page
Value
50bps-128Kbps (except port 0, between 300bps-115.2Kbps)
5, 6, 7, or 8 (except port 0, 7 or 8)
1, 2, or 1.5 (except port 0, 1 or 2 stop bits)
N (none), E (even), O (odd)
Hardware, Software, Both, or None
ASCII codes between 0 and 31 (see Fig. 9, pg. 13)
ASCII codes between 0 and 31 (see Fig. 9, pg. 13)
High, Low, or Pulsed
1-60 ms
Yes or No
1-999 ms
or 0 to disable it
41
Advertisement
Table of Contents
