Yeastar Technology NeoGate User Manual page 52

2) Advanced mode
When simple mode is set as "No", you can check the advanced settings.
Items
Route name
Call Source
Inbound caller pattern
DID number
DID Associated Number
Enable Callback
http://www.yeastar.com
NeoGate TG Series User Manual
Figure 7-33
Description
A name for this route
Choose the trunk where incoming call comes from
Match the prefix of caller ID for incoming calls.
Hover the pointer over
Define the expected DID Number if this trunk
passes DID on incoming calls. Leave this field blank
to match calls with any or no DID info. You can also
use pattern matching to match a range of
numbers.
Define the extension for DID number. You can only
input number and "-" in this field, and the format
can be xxx or xxx-xxx. The count of the number
must be only one or equal the count of the DID
number
Choose whether call back is enabled, you can
configure the advanced call back settings in part:
7.3.4.
to read tips.
52/56