Yeastar Technology NeoGate User Manual page 43

Items
UDP Port
TCP Port
TLS Port
TLS Verify Server
TLS Verify Client
TLS Ignore Common
Name
TLS Client Method
RTP Port Start
RTP Port End
DTMF Mode
Max
Registration/Subscription
Time
Min
Registration/Subscription
Time
Default
Incoming/Outgoing
Registration Time
http://www.yeastar.com
Figure 7-20
Description
Port used for SIP registrations, Default is 5060
Port used for SIP registrations, Default is 5060
Port used for SIP registrations, Default is 5061
When using NeoGate TG as a TLS client, whether or not
to verify server's certificate. It is "No" by default.
When using NeoGate TG as a TLS server, whether or
not to verify client's certificate. It is "No" by default.
Set this parameter as "No", then common name must
be the same with IP or domain name.
When using NeoGate TG as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
Beginning of RTP port range
End of RTP port range
Set default mode for sending DTMF. Default setting:
rfc2833
Maximum duration (in seconds) of a SIP registration.
Default is 3600 seconds.
Minimum duration (in seconds) of a SIP registration.
Default is 60 seconds
Default Incoming/Outgoing Registration Time: Default
duration (in seconds)
registration.
NeoGate TG Series User Manual
of incoming/outgoing
43/56