Power Supply - IBM IntelliStation A Pro 6224 Hardware Maintenance Manual And Troubleshooting Manual

Power supply

Note:
v Read "Installation guidelines" on page 25.
v Read Appendix B, "Safety information," on page 117.
v Read "Handling static-sensitive devices" on page 25.
Complete the following steps to remove the power supply:
1. Turn off the computer and attached devices; then, disconnect all power cords
2. Remove the cover and support bracket (see "Replacing the side cover" on page
Locking
lip
Figure 31. Removing the air baffle
3. Remove the air baffle, if present.
4. Disconnect the internal power supply cables to the drives and the system board.
70
IntelliStation A Pro Type 6224: Hardware Maintenance Manual and Troubleshooting Guide
and external cables.
Note: Removing the power supply might be easier if the computer is turned on
its side.
27 and "Replacing the support bracket" on page 29).
Note: The illustrations in this document might differ slightly from your hardware.
Power supply alignment flange
Air baffle
94
13