Zoom Limit - HIKVISION IR Network Speed Dome User Manual

User Manual of Network Speed Dome
demand as shown in Figure 6-32.

Outdoor
You can select this mode when the speed dome is installed in outdoor environment.

Indoor
You can select this mode when the speed dome is installed in indoor environment.
 Fluorescent Lamp
You can select this mode when there are fluorescent lamps installed near the speed
dome.

Sodium Lamp
You can select this mode when there are sodium lamps installed near the speed
dome.

Auto-Track
In Auto-Track mode, white balance is continuously being adjusted in real-time
according to the color temperature of the scene illumination.
Note: This function varies depending on the models of speed dome.
3D Digital Noise Reduction
You can enable or disable the 3D Digital Noise Reduction function as shown in Figure
6-33. The level ranges from 0 to 100.
Note: This function varies depending on the models of speed dome.

Zoom Limit

You can set Zoom Limit value to limit the maximum value of zooming. The value can
be set to 20, 40, 80, 160 and 320.
Note: This function varies depending on the models of speed dome.
IR Light Mode
IR light mode can be set to Auto and Manual.

Auto: The brightness of the infrared light will be adjusted automatically. IR Light
Sensitivity value ranges from 0 to 100.
 Manual: you need to adjust the brightness value of infrared light manually. IR
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-32 Manual White Balance
Figure 6-33 3D Digital Noise Reduction
61