Configuring Image Settings; Configuring Display Settings - HIKVISION IR Network Speed Dome User Manual

User Manual of Network Speed Dome
2. Configure the following settings.
Audio Encoding: G.711ulaw, G.711alaw and G.726 selectable.
3. Click

6.5 Configuring Image Settings

6.5.1 Configuring Display Settings

Purpose:
You can set the image quality of the speed dome, including brightness, contrast,
saturation, sharpness, etc.
Note: The parameters in Display Settings interface vary depending on the models of
speed dome.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the speed dome.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-24 Audio Settings
to save the settings.
56