Configuring Osd Settings - HIKVISION IR Network Speed Dome User Manual

62
User Manual of Network Speed Dome
Light Bright value ranges from 0 to 100.
Note: For detailed parameters configuration of IR light, you can enter the OSD menu
by calling the special preset 95.
Chroma Suppress
The Chroma Suppress level ranges from 0 to 100 as shown in Figure 6-34.
Figure 6-34 Chroma Suppress
Note: This function varies depending on the models of speed dome.
Local Output
You can select the output mode to Off, Clip Output or Scale Output.

6.5.2 Configuring OSD Settings

Purpose:
The speed dome supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of speed dome.
You can customize the on screen display of time.
Steps:
1. Enter the OSD Settings interface:
Configuration > Advanced Configuration > Image > OSD Settings
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.