Setting / Calling A Patrol - HIKVISION IR Network Speed Dome User Manual

User Manual of Network Speed Dome
speed dome remotely. To display the OSD menu on the live view screen, you can call
the preset number 95.

4.5.3 Setting / Calling a Patrol

Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click
2. Select a patrol number from
3. Click to enter the adding interface of preset as shown in Figure 4-7.
4. Configure the preset number, patrol duration and patrol speed.
Name
Patrol Duration
Patrol Speed
5. Click to save a preset into the patrol.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to enter the patrol settings interface.
Figure 4-7 Adding Presets
Description
It is the duration staying on one patrol point. The speed
dome moves to another patrol point after the patrol
time.
It is the speed of moving from one preset to another.
.
28