HIKVISION IR Network Speed Dome User Manual page 83

User Manual of Network Speed Dome
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type
and check the checkbox of Trigger Channel in the Linkage Method of
Alarm Input Settings interface. For detailed information, please refer to
Section 6.6.4 Configuring External Alarm Input.
 Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 6.6.1 and Section 6.6.4 for detailed information.
 Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 6.6.1 and Section 6.6.4 for detailed information.
(3) Check the checkbox
day to the whole week. You can also check any of the checkboxes before the
date and click
(4) Click
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 7-8 Edit Record Schedule
and click
.
to save the settings and exit the Edit Record Schedule
82
to copy settings of this