Handling Exception - HIKVISION IR Network Speed Dome User Manual

User Manual of Network Speed Dome

6.6.6 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1
Configuring Motion Detection.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-46 Alarm Output Settings
73