User Manual of Network Speed Dome
6.6.1 Configuring Motion Detection
Purpose:
Motion detection is a feature which can trigger alarm actions and actions of
recording videos when the motion occurred in the surveillance scene.
Steps:
1. Set the Motion Detection Area.
Steps:
(1) Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
(2) Check the checkbox of Enable Motion Detection.
(3) Click
a motion detection area.
Note:
You can draw up to 8 motion detection areas on the same image.
(4) Click
Note:
You can click
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-38 Enable Motion Detection
. Click and drag the mouse on the live video image to draw
to finish drawing.
to clear all of the areas.
65