Scaling Percent - QMS Print System 3260 Getting Started Manual

To change the HP-GL emulation scaling percent, press the control panel buttons in
the order shown in the following table. The printer responds by displaying a status
message or configuration menu in the message window. An underline indicates the
current input character in the message window.
» Note: You may need to press the Next button more than once to advance through the
list of selections or options.
Press this button
Online
Menu
Next
Select
Next
Select
Next
Select
Next
Select
Previous
to...
Turn off the Online indicator and
readies the printer for configuration.
Access the configuration menu.
Advance to the Administration menu.
Access the Administration menu
Advance to the Emulation menu.
Access the Emulations menu.
Advance to the Emulations/HP-GL
menu.
Access the HP-GL menu.
Advance to the HP-GL/Scaling Percent
menu.
Access the Scaling Percent menu.
Lower the current character to 0.
The message window
reads...
IDLE
CONFIGURATION
OPERATOR CONTROL
CONFIGURATION
ADMINISTRATION
ADMINISTRATION
COMMUNICATIONS
ADMINISTRATION
EMULATIONS
EMULATIONS
ESP DEFAULT EMUL
EMULATIONS
HP-GL
HP-GL
PLOTTER
HP-GL

SCALING PERCENT

SCALING PERCENT
100
SCALING PERCENT
000