Notes On Installing Printer Description Files - QMS Print System 3260 Getting Started Manual

Remote Console—For information on accessing Remote Console through a tel-
net session, refer to the appropriate chapter in the QMS CrownNet System
Administrator's Guide . For information on using Remote Console, refer to the
QMS Crown Remote Console User's Guide .
Refer to the QMS CrownNet Setup Guide on the software utilities CD-ROM for infor-
mation on configuring your network.
If you're replacing a PostScript printer, you can probably start printing now with the
printing software already in place. Refer to your application documentation for instruc-
tions on sending documents to the printer.
However, if you want to be able to use all your printer's special features, or if you've
never printed to a PostScript printer before, we recommend you take a few minutes to
make sure you have the following printing software installed:


A PostScript Level 2 printer driver


Printer description files (if you use QuarkXPress 3.3, PageMaker, or Photoshop).
See chapter 5, "Notes on Installing Printer Description Files" on page 3-2.
If you're using Windows, we recommend that you install one of the QMS-developed
Level 2 Windows drivers on the QMS Software Utilities CD-ROM we shipped with your
printer. Drivers are available for


Windows 3.1


Windows for Workgroups 3.11


Windows 95/98


Windows NT 3.51