QMS Print System 3260 Getting Started Manual page 52

Note: You may need to press the Next button more than once to advance through the
»
list of options.
Press this button
Online
Menu
The printer must be off line and idle before you can access the configuration menu.
Once you access the configuration menu, you use the control panel buttons to move
through the menu. Use the following buttons:
Press this button
Next
Previous
Select
To change the default printer emulation from ESP to PostScript for the parallel port,
press the control panel buttons in the order shown in the following table.
Note: You may need to press the Next button more than once to advance through the
»
list of selections or options.
Press this button
Online
to...
Turn off the Online indicator and
ready the printer for configuration.
Access the configuration menu.
to...
Advance to the next option or submenu within a menu.
Return to the previous option or submenu within a menu.
Select an option or enter a submenu.
to...
Turn off the Online indicator and
ready the printer for configuration.
The message window
reads...
IDLE
CONFIGURATION
OPERATOR CONTROL
The message window
reads...
IDLE