QMS Print System 3260 Getting Started Manual page 25

Print system
Hide thumbs Also See for Print System QMS 3260:
Table of Contents

Advertisement

Follow the instructions in the Quick Setup Guide included with your printer shipment to
install the toner cartridge and paper. Use the Quick Setup Guide - Options to install
options included with your shipment.
»
Note: Remember to turn off the printer before you install an option.
1
Make sure the printer is turned off.
2
Plug the printer into a grounded, surge-
protected, electrical outlet.
3
Turn on the printer.
Press in the power button next to the control
panel. After a brief warm-up (typically
3 minutes) the printer produces a start-up
page. More information about start-up pages
is included in the Reference manual.
Note: The number of sheets/faces printed statistics on the start-up page will differ
»
from the number of sheets/faces printed statistics in CrownView and on the
consumables statistics page (Operator Control/Consumables/Print Statistics). The
numbers on the start-up page refer to the number of sheets/faces printed during
the life of the printer. The numbers in CrownView and on the consumables
statistics page refer to the number of sheets/faces printed to date during the
current consumables tracking period (Administration/Consumables/Start Period
menu).
4
If the start-up page doesn't print or the print quality is not good, see chapter
5,"Troubleshooting Setup."

Advertisement

Table of Contents
loading

This manual is also suitable for:

4032

Table of Contents