QMS Print System 3260 Getting Started Manual page 34

Windows NT 4.0
The auto-installation program on the QMS Software Utilities CD-ROM will give you the
choice of drivers to install. The auto-installation program is available only for Windows
95/98 and Windows NT 4.0. For earlier versions of Windows refer to the README file
on the CD-ROM for further information and information on the directory location of
each driver. Then refer to the README file in that directory for more installation infor-
mation.
If you're using a non-Windows application, read the printing section of the applica-
tion documentation for information on choosing a PostScript driver. If the application
does not provide a PostScript driver, contact the application manufacturer to see if one
has become available since you bought the program. See appendix A, "QMS Cus-
tomer Support," for information.
Also, check to see if application notes (tips for printing from specific applications) are
available for your application from Q-FAX or the QMS
Customer Support," explains how to use these QMS information services.
System Requirements


An IBM or compatible computer with 386 or higher processor


A hard disk with at least 1 MB of free space


At least 4 MB of RAM


Windows 95/98
Installation
CAUTION: Windows limits the total number of installed printers to 16.
CAUTION: Problems may occur if you install both the QMS PostScript printer driver
and a QMS Win95 PPD for the Microsoft PostScript printer driver. If they have the
same printer model name (for example, "QMS 4032" or "QMS 3260
registry entry for one will overwrite the other (even if you have assigned different
printer names), and unpredictable behavior will result. If one of these drivers is already
installed, you must delete it before installing the other.
. Appendix A, "QMS
website
), the driver
"