Chipset Features Setup - TMC TI6NB User Manual

6.5 Chipset Features Setup

This Setup menu controls the configuration of the motherboard chipset.
Auto Configuration
EDO DRAM Speed Selection
EDO CASx# MA Wait State
EDO RASx# Wait State
SDRAM CAS Latency Time
DRAM Integrity Mode
System BIOS Cacheable
Video BIOS Cacheable
Video RAM Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time
Memory Hole At 15MB-16MB
Passive Release
Delayed Transaction
AGP Aperture Size (MB)
Auto Detect DIMM/PCI Clk
Spread Spectrum
Auto Configuration
This field predefines values for DRAM, cache timing according to CPU
type and system clock. When this field is enabled, the predefined items
will become read-only.
SDRAM CAS Latency Time
When synchronous DRAM is installed, the number of clock cycles of
CAS latency depends on the DRAM timing. Do not reset this field from
the default value specified by the system designer.
System BIOS Cacheable
When enabled, access to the system BIOS ROM addressed at
F0000H-FFFFFH are cached, provided that the cache controller is
disabled.
Video BIOS Cacheable
When enabled, access to video BIOS addressed at C0000H to C7FFFH
are cached, provided that the cache controller is disabled.
Video RAM Cacheable
Selecting Enabled allows caching of the video BIOS ROM at C0000h to
C7FFFh, resulting in better video performance. However, if any program
TI6NB Pentium II 440BX ATX Motherboard User's Manual
Chapter 6 BIOS and System Setup
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE INC.
: Enabled
CPU Warning Temperature
: 60ns
: 2
Current CPU Block Temp.
: 2 Current CPU/Chips Temp.
3 Current System Temp.
Non-ECC Current CPU Fan Speed
: Disabled
Current Chassis Fan Speed
: Enabled
: Disabled
VCCP (V): 1.98 V
: 3
VCC3 (V) : 3.45 V
: 2
+12 V : 12.46 V
: Disabled
-5V : - 5.21 V
: Enabled
: Enabled
: 64
: Disabled
: Disabled ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: 66°C/151°F
: 41°C/ 105°F
: 27°C/ 80°F
: 34°C/ 93°F
: 2789 RPM
: 2045 RPM
VTT (V) : 1.50 V
+ 5 V : 4.99 V
-12 V : -12.54V
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
39