Power Management Setup - TMC TI6NB User Manual

6.6 Power Management Setup

The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
POWER MANAGEMENT SETUP
Power Management : User Define
PM Control by APM : Yes
Video Off Method : V/H SYNC +Blank
Video Off After : Standby
MODEM Use IRQ : 3
Doze Mode : Disabled
Standby Mode : Disabled
Suspend Mode : Disabled
HDD Power Down : Disabled
Throttle Duty Cycle : 62.5%
VGA Active Monitor : Enabled
Soft-Off by PWR-BTTN : Instant-Off
Resume by Ring : Disabled
Resume by Alarm : Disabled
IRQ 8 Break Suspend : Disabled
Power Management
This field allows you to select the type of power saving management
modes. There are fours selections for Power Management.
Min. Power Saving
Max. Power Saving
User Define
NOTE: In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.
TI6NB Pentium II 440BX ATX Motherboard User's Manual
Chapter 6 BIOS and System Setup
ROM PCI/ISA BIOS
AWARD SOFTWARE, INC.
** Reload Global Timer Events **
IRQ3 (3-7, 9-15), NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Minimum power management
Maximum power management.
Each of the ranges are from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
(Default)
: Disabled
: Enabled
: Enabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
43