Ide Hdd Auto Detection - TMC TI6NB User Manual

Chapter 6 BIOS and System Setup

6.12 IDE HDD Auto Detection

This option detects the parameters of an IDE hard disk drive, and
automatically enters them into the Standard CMOS Setup screen.
HARD DISKS TYPE SIZE
Primary Master:
Select Primary Master Option (N=SKIP) : N
OPTIONS TYPE SIZE
1 (Y) 0 0
NOTE: Some OSes (like SCO-UNIX) must use "N N N N ORMAL" for installation
Up to four IDE drives can be detected, with parameters for each
appearing in sequence inside a box. To accept the displayed entries, press
the "Y" key; to skip to the next drive, press the "N" key. If you accept the
values, the parameters will appear listed beside the drive letter on the
screen.
52 TI6NB Pentium II 440BX ATX Motherboard User's Manual
ROM PCI/ISA BIOS
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
CYLS HEAD PRECOMP LANDZ
CYLS HEAD PRECOMP LANDZ
0 0 0 0
ESC: SKIP
SECTOR MODE
SECTOR MODE
0 NORMAL