NTI RACKMUX-VS17-T RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE
When connecting a CPU with DVI support (RACKMUX-DS17-T) to the single-link DVI port of the RACKMUX, use the DVI-D-6
(supplied with DS17 models) for the DVI video signal and the USB-AB-2M (supplied) for the USB connection between the CPU
and RACKMUX.
DVI-D-Male
DVI-D-Male
DVI-D-Male
DVI-D-6
(supplied with DS17 models)
(3 and 9 foot cables also available)
USB Type B
USB Type A
USB-AB-2M
Male
USB-A - Male
USB-B - Male
Male
(supplied)
(.5, 1, 3, and 5 meter cables also available)
Figure 5- Cables for DVI video application
Connect Extra Device
On the front of the RACKMUX-VS17-T is an additional USB Type A port to be used, if desired, for an extra accessory. Any low or
full speed USB device may be connected to this port to be used.
This port is fully compliant with USB 1.1 standard.
Note: If a USB keyboard or mouse is connected, operation of the RACKMUX-VS17-T keyboard or trackball may cause
unpredictable results.
Do not try to use both mice or both keyboards at the same time.
FRONT VIEW OF RACKMUX-VS17-T
Connect optional USB 1.1 or 2.0 device
CAMERA
SCANNER
FLASH DRIVE
PRINTER
Figure 6- Connect a USB device to the front (optional)
Note: If a USB 2.0 device is connected to the optional USB device port, it will operate at USB 1.1 speed.
5