Setup Menu; Osd Main Menu- Dvi Monitor - NTI RACKMUX-VS17-T Installation And Operation Manual

NTI RACKMUX-VS17-T RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE

Setup Menu

Selecting the Setup menu will bring up a screen in which the user can adjust the following:
OSD POSITION - the position of the OSD menus on the LCD display
OSD TIME - the length of time the user can be idle before the OSD menu automatically exits (adjustable from
LANGUAGE - the language that the OSD menus will be presented in
With the item highlighted, (use the Up or Down arrow to move between them), press the Select button to choose the option to
adjust. Then use the Up or Down Arrow to adjust the setting as needed.
Menu.
OSD Image can be moved
to different points on the
display

OSD Main Menu- DVI Monitor

Note: In order to display the OSD Menu, the RACKMUX must first be connected to a video source (see "Connect to a
CPU" – page 4).
Note: If menu does not appear when the Menu button is pressed, the monitor may be set for a "PC" (VGA) input source.
Press the Up Arrow button on the monitor to switch it to a "Digital" (DVI) input source.
Selection Purpose
Brightness/Contrast Increase/decrease panel brightness/contrast level
Setup
Control OSD Image position on screen
•
Set time OSD will stay on screen before auto shutoff
•
Select the language of the OSD menu
•
Select Input Source to display
•
Exit Exit from the OSD control menu
10 to 60 seconds)
Select EXIT when finished to return to the Main
Range
1-100
• 0-4
• 10 to 60 seconds
• English, Spanish, Deutsch, Italian, or French
• Digital or PC (must be set to Digital)
9