NTI RACKMUX-VS17-T RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE
DISPLAY FUNCTIONS
Standard Controls
The RACKMUX has 5 standard control buttons and a power LED. The 5 standard control buttons operate as follows:
The Power button turns the RACKMUX LCD and backlight ON and OFF as desired.
•
The Power LED located immediately below the Power button is a dual color
•
LED.
It will illuminate with a green color when the RACKMUX is powered
ON and working properly.
is powered ON but there is no input signal detected.
The Menu button is used to bring up the OSD menu where the various
•
settings of the LCD display can be adjusted. Once the OSD screen is
displayed, the Menu button is used to make selections within the menus.
See "OSD Control Menu" (below) for more on LCD display settings.
The Up and Down Arrow buttons are used to navigate through the menus.
•
Move the cursor up or down as desired to highlight an item for selection.
Once an item is highlighted, pressing the Menu button will select it.
Note: On DVI monitors, when the OSD Menu is OFF, the Up Arrow is used to
toggle between a "PC" (VGA) and "Digital" (DVI) input source.
The Select button is used to make selections within the OSD menus when the OSD menu is ON. When the OSD menu is
•
OFF, the Select button will act as an Auto Adjust button to keep the user from having to use the menus to adjust the quality
of the image on the monitor.
Note: In order to display the OSD Menu, the RACKMUX must first be connected to a video source (see "Connect to a
CPU" – page 4).
Note for DVI monitors only: If the message "NO SIGNAL" appears when the monitor is powered-ON, the monitor may be
set for a "PC" (VGA) input source. Press the Up Arrow button on the monitor to toggle the monitor input source setting
to "Digital" (DVI).
OSD Control Menu
The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display.
OSD Menu, press the Menu button (above).
10-60 seconds and it will automatically be cleared from the screen.
OSD Main Menu- VGA Monitor
Selection
Purpose
Brightness/Contrast
Increase/decrease panel brightness/contrast level
Color
R,G,B color temperature control
Position
Video image horizontal and vertical position control
•
Clock setting
•
Phase control
•
It will illuminate with a red color if the RACKMUX
To turn the Menu back OFF, either select "EXIT" from the main menu or just wait
Power
ON/OFF
Power LED
Up Arrow
Down Arrow
Select/
Auto Adjust
Figure 8- OSD Controls
Range
1-100
1-100
1-100
7
Menu
Controls for the
OSD Menus
To activate the