Replacing Hard Disk Drives; Ê Remove The Side Cover As Described In Section; Ê Open The Hdd Cage As Described In Section - Fujitsu PRIMERGY TX100 S2 Service Supplement Manual

4.5

Replacing hard disk drives

Ê Shut down the server and disconnect the AC power cord from the system.
Ê Remove the side cover as described in section
Ê Open the HDD cage as described in section
Figure 48: Removing HDD cables
Ê Remove all cables from the desired hard disk drive.
I
In 4-HDD configurations, when replacing hard disk drives 3 and / or
4, you will also need to disconnect cables from hard disk drives 1
and / or 2 (see orange arrows).
TX100 S2
Service Supplement
Replacement routines
4.1.1.1 on page
4.1.2.1 on page 25.
23.
67