Replacing The Trusted Platform Module (Tpm) - Fujitsu PRIMERGY TX100 S2 Service Supplement Manual

Replacement routines
I
In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to store the
server's FRU data on the onboard Chassis ID EPROM using the Chassis
ID PROM Tool (ChasProm.exe) after installing the new system board. The
tool is available for download from the following Fujitsu Technology
Solutions support page:
http://partners.ts.fujitsu.com/com/service/intelservers/tools
4.9 Replacing the Trusted Platform Module
(TPM)
V
CAUTION!
Advise the customer that he must provide you with TPM backup copies.
For security reasons, the TPM must be restored/re-saved by the
customer. If the customer DOES NOT have a backup copy available,
inform him that replacing the TPM will cause him to lose all his data.
Ê Shut down the server and disconnect the AC power cord from the system.
Ê Remove the side cover as described in section
Ê Open the HDD cage as described in section
Ê Remove the system board as described in section
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
104 Service Supplement
4.1.1.1 on page
4.1.2.1 on page 25.
4.8 on page
23.
96.
TX100 S2