Removing Or Installing The Air Duct; Removing The Air Duct - Fujitsu PRIMERGY TX100 S2 Service Supplement Manual

4.1.4

Removing or installing the air duct

4.1.4.1

Removing the air duct

Part number: C26361-K1007-C871-*-3298
The following replacement routines require removing the air duct:
– Replacing the front fan module (system fan 1)
– Replacing the front panel cable
– Removing the processor heat sink
– Replacing the processor
– Replacing the system board
I
This procedure is best performed with the server in a horizontal position.
Ê Shut down the server and disconnect the AC power cord from the system.
Ê Remove the side cover as described in section
Ê Open the HDD cage as described in section
TX100 S2
Service Supplement
Replacement routines
4.1.1.1 on page
4.1.2.1 on page 25.
23.
33