Electrolux EDI 96150 W User Manual page 34

125986590.qxp 2007-01-29
34 electrolux cleaning and maintenance
Cleaning heat exchanger
If the HEAT EXCHANGER display is
illuminated, the heat exchanger needs
to be cleaned.
Caution! Operating when the heat
exchanger is clogged with lint can
damage the appliance. This also
increases energy consumption.
1. Open loading door
2. Open base door. To do this, press
the release button located beneath
the loading aperture and open the
base door to the left.
3. Remove lint from the inside of the
door and the heat exchange
chamber. Wipe the door seal with a
damp cloth.
4. Turn both lock washers inwards.
5. Use the handle to pull the heat
exchanger out of the base and carry
it horizontally to prevent any
remaining water from spilling.
6. To empty the heat exchanger, hold
vertically over a washing-up bowl.
10:50 Page 34