Transporting the appliance
Important: Only tip the appliance on its left
side to transport (see illustration), if it cannot
be transported in an upright position.
Removing transport safety equipment
Caution! Before first starting up, all parts of
the transport safety equipment must be re-
1. Open loading door
2. Pull off adhesive strips from inside machine on top
3. Remove foil hose and polystyrene padding from
If the appliance was not transported in an up-
right position, leave it to stand for 12 hours be-
fore connecting it to the electricity supply and
using it for the first time, so that the oil can
flow back to the compressor. Otherwise the
compressor could be damaged.