Electrolux EDI 96150 W User Manual page 30

125986590.qxp 2007-01-29
30 electrolux cleaning and maintenance
Emptying the condensed water container
Empty condensed water container after
every drying cycle.
If the condensed water container is full,
an active programme will break off
automatically and the TANK display will
light up. In order to continue the
programme, the condensed water
container must first be emptied.
Warning! The condensate is not
suitable for drinking or for preparing
foodstuffs.
1. Pull drawer containing condensed
water container all the way out (1)
and pull up the condensed water
container's drainage pipe as far as it
will go (2).
2. Pour out the condensate into a
basin or similar container.
3. Push drainage pipe in and refit
condensed water container.
If the programme has been interrupted
as a result of the condensed water
container being full:
Press the START/PAUSE button to
continue the drying cycle.
The condensed water container has a
volume of approx. 4 litres. This is
sufficient for around 6 kg of laundry
which has previously been spun at
1000 revolutions/minute.
10:50 Page 30