Installation Safety Instructions - Electrolux EDI 96150 W User Manual

125986590.qxp 2007-01-29

Installation safety instructions

• Important! The appliance must be
moved in vertical position for
transport.
• Before first starting up, all parts of
the transport safety equipment must
be removed. The machine may
otherwise be damaged.
• The appliance must not be built-in.
• Before starting up for the first time,
ensure that the nominal voltage and
type of current specified on the
appliance's rating plate match the
nominal voltage and type of current
at the installation site. The electrical
fuse required can also be found on
the rating plate.
• Always connect the machine to an
earthed socket in accordance with
current wiring regulation. The
manufacturer declines any
responsibility for damage or injury
through failure to comply with the`
above safety precaution.
• With permanent connections: A
permanent connection may only be
established by an authorised
specialist electrician.
• Do not install appliance in rooms at
risk of frost.
• Do not position the appliance behind
– a door that can be locked,
– a sliding door
– a door with a hinge situated opposite
the appliance's hinge.
10:50 Page 39
installation safety instructions electrolux 39
• The door of the appliance must not
be able to be blocked by house
doors or other appliance doors.
• Do not install on a carpet with a high
pile. Air circulation at the ventilation
holes will be hindered.
• Ensure that the appliance is not
standing on the mains cable. Install
the machine horizontally.