Installation And Connection Instructions; Installation Safety Instructions; Removing Transport Safety Equipment - Electrolux EDC 5372 User Information

Installation and connection instructions

1

Installation safety instructions

• Before first starting up, all parts of the transport safety equipment must be
removed. The machine may otherwise be damaged.
• Before starting up for the first time, ensure that the nominal voltage and
type of current specified on the machine type plate match the nominal
voltage and type of current at the installation site. The electrical fuses re-
quired can also be found on the type plate.
• Always connect the plug into a protection contact socket which has been
installed as specified.
• With permanent connections: A permanent connection may only be es-
tablished by an authorised specialist electrician.
• Do not install machine in rooms at risk of frost.
• Ensure that the door of the machine cannot be blocked by interior doors
of the house or the doors of other appliances.
• Do not install on carpets with high piles. Air circulation will be hindered at
the ventilation slots.
• Ensure that the machine is not placed on its mains cable.
• Install the machine horizontally.

Removing transport safety equipment

1
Caution! Before first starting up, all
parts of the transport safety equipment
must be removed.
1.Open loading door
2.Pull off adhesive strips from inside
machine on top of drum.
3.Remove foil hose and polystyrene
padding from the machine.
24