Assembly Instructions - York Fitness CHALLENGER Elite Owner's Manual

Assembly Instructions

8. Attach the pedals
8.1 Attach the straps to the pedals (the straps and
pedals are marked L and R, match each strap to the
corresponding pedal).
8.2 Attach the L pedal to the left crank arm - this pedal
will thread on anti-clockwise.
8. Attach the R pedal to the right crank arm - this
pedal will thread on clockwise.
Final check
• Your cycle is now assembled. Please make the following final checks before you use it for the first time.
• Make sure all screws / bolts are tightened.
• Make sure you have positioned it on a flat, level surface.
Power up
1. Plug one end of the adaptor into your cycle as shown.
2. Plug the other end into a suitable AC outlet (220 - 20V - 50Hz).
10 • CHALLENGER Elite Bike | OWNER'S MANUAL