York Fitness CHALLENGER Elite Owner's Manual page 7

4. Attach the console
.1 Connect the computer wires together.
.2 Secure onto the bracket using screws as shown
(Screws are located in the back of the console).
Part No.
85
15 mm machine screw x 4
5. Attach the handlebars
5.1 Open the handlebar clamp bracket and place the
handlebar inside.
5.2 Close the clamp bracket and place the front and
rear handlebar bracket covers over it.
5. Secure in place using the T-bar bolt and screws as
shown.
5. Plug the pulse wire into the back of the computer.
NOTE: Make sure T-bar bolt is fastened tightly
Part No.
21
10 mm machine screw x 2
Part No.
22
12 mm self tapping screw x 2
8 • CHALLENGER Elite Bike | OWNER'S MANUAL
85