Table of Contents
Advertisement
2-3. Moving the Spindle Head
Do not put the operation panel on the machine while operation. Doing so may result in unexpected problems.
Moving the Spindle Head
The spindle head moves in three directions, along the X, Y, and Z axes. When the display shows the top screen, pressing
the movement buttons effects movement in the corresponding directions.
Make sure the display shows the top screen. You cannot perform movement
when any other screen is displayed. Press
top screen.
The speed of movement is determined by how you press the movement buttons, as described below.
Pressing and holding down a movement button
While holding down
a movement button
Pressing and releasing a movement button
While holding down
a movement button
Chapter 2 - Basic Operation
26
several times to display the
, pressing and holding down
, pressing and releasing
X
0
Z
0
Slow continuous movement
Fast continuous movement
Movement of 0.01 mm per press
Movement of 0.1 mm per press
Y-axis direction
X-axis direction
Y
0
8000RPM
Z-axis direction
Advertisement
Table of Contents
