The Print-Head Carriage Stops Moving; What To Do First; If The Print Heads Still Do Not Move - Roland Soljet EJ-640 User Manual

The Print-head Carriage Stops Moving

If the print-head carriage (hereinafter "print heads") stops over the platen, take action immedi-
ately to prevent the print heads from drying out.

What to Do First

If the print heads still do not move

Try switching off the main power, then again switching on the main power, followed by the sub power.

If the Print Heads Still Do Not Move

If the print heads still do not move, carry out the following emergency response measure, and then contact
your authorized Roland DG Corp. dealer.
Procedure

Switch off the main power, and then open the front cover.

Remove the right cover.
Switch the sub power off, then back on
again.
If the media is jammed, then also remove
the media.
If the print heads move to the home position
(inside the right cover), it means the opera-
tion has ended successfully.
6
125