Table of Contents
Advertisement
7-1. Daily Care
Carefully clean away cutting waste. In addition to the table and bed, also clean the spindle head and the X-axis rail.
Use a commercially available brush to remove metal cuttings. Attempting to use a vacuum cleaner to take
up metal cuttings may cause fire in the vacuum cleaner.
Do not use a pneumatic blower to clean. Cutting dust may be hazardous to health. Breakdown of the ma-
chine may also occur.
Switch off the machine and unplug the power cord from the electrical outlet before performing cleaning
or maintenance. Failure to do so may result in injury or electrical shock.
Do not use solvents such as thinner, benzine, or alcohol
to clean.
Around the switch
Around the switch
Chapter 7 - Maintenance
118
Around the spindle head
Inside the X-axis rail
Table and bed
Around the memory-card slot
Advertisement
Table of Contents
