Table of Contents
Advertisement
1-2. Names and Functions
Rear
Expansion connector 1
This connector is for transmitting the
rotation of the spindle to an external
device.
Operation Panel
Menu button
This displays the main menu.
Connector
X/Y-axis Origin Set button
This sets the reference point for the
cutting position.
Z-axis Origin Set button
This makes settings such as for the
reference point for aligning the
cutter.
Copy button
This calls up the menu for the copy
feature.
Movement buttons
These move the spindle head forward
and backward and to the left and right.
They are also used for menu opera-
tions.
Chapter 1 - Getting Started
18
Expansion connector 2
This is for communication with an
external device using the teaching
feature.
Parallel connector
This connector is for
connection to the printer
port on the computer.
ENTER/PAUSE button
This enables values you enter. Pressing it while
cutting is in progress pauses operation.
Feed button
This is used in combination with
the movement buttons.
Power-cord connector
Serial connector
This connector is for
connection to the COM
port on the computer.
Spindle button
This starts and stops rotation of
the spindle.
Z-axis Movement buttons
These move the spindle head up
and down.
Power switch
Display
Dial
This adjusts the spindle rotating
speed. It is also used for menu
operations.
Advertisement
Table of Contents
