Table of Contents
Advertisement
2-2. Switching the Power On and Off
Switching On the Power
Keep your hands away from the machine when you turn on the power. Also, do not place and objects
where they may obstruct the operation of the spindle head, X-axis rail, bed, or other components.
Turning On the Power
1
Turn on the power switch on the back of the
machine.
The display shows the model name, and while this is dis-
played, internal initialization is performed. This takes
about ten seconds.
2
When the screen shown at right appears, press
.
This machine operates at this time. The spindle head
moves to the left and back (to the VIEW position), then
stops.
3
The display changes to the top screen, and
startup ends.
Switching Off the Power
Turn off the power switch on the back of the machine. Do not the emergency stop switch for turning the power on and off
in day-to-day use.
EGX-600
Roland DG Corp.
Hit "ENTER" key
X
0
Y
40700
Z
0
8000RPM
Chapter 2 - Basic Operation
25
Advertisement
Table of Contents
