Maintenance Of The Z-Axis Screw - Roland EGX-600 User Manual

Maintenance of the Z-axis Screw

Switch off the machine and unplug the power cord from the electrical outlet before performing cleaning
or maintenance. Failure to do so may result in injury or electrical shock.
Use a cleaning cloth or the like to clean away any buildup of cutting waste or old grease on the Z-axis screw, then apply
a small amount of fresh grease.
Recommended grease: Lithium grease #2 or the equivalent
Do not lubricate any areas other than
the Z-axis screw.
7-2. Maintenance and Inspection
Chapter 7 - Maintenance
121