Controls And Features; Control And Feature Identification Codes - TOHATSU BFT 75A Owner's Manual

CONTROL AND FEATURE IDENTIFICATION CODES

Model
Type
Transom Height 21.1 in (537 mm)
(Shaft Length)
26.1 in (664 mm)
Tiller Handle
Remote Control
Power Trim/Tilt
Tachometer
Trim Meter
TRL (Trolling) Control Switch
* Optional equipment
Refer to this chart for an explanation of the Type Codes used in this manual to identify control and feature applications.
TYPE CODE (example)
L R T A
Destination: A= American
Tilt System: T= Power Trim/Tilt
Control System: R= Remote Control
Transom Height (Shaft Length): L= 21.1 in (537 mm), X= 26.1 in (664 mm)
BFT75A
LRTA LRTA
 
* *
* *
 
* *
* *
* *

CONTROLS AND FEATURES

BFT90A
XRTA

*
*

*
*
*
11