Shallow Water Operation - TOHATSU BFT 75A Owner's Manual

OPERATION
Trim Tab
If steering effort is not equal in both
directions, adjust the trim tab to
compensate for "torque steer," which
is the reaction of the outboard motor
to propeller rotation.
GEAR CASE
TRIM TAB BOLT
GROMMET
TRIM TAB
Adjust the trim tab with the engine
stopped. Remove the gear case
grommet. Loosen the trim tab bolt
above the trim tab, turn the trim tab,
and then tighten the bolt and install
the gear case grommet securely.
68
When the trim tab is correctly
adjusted, steering effort will be equal
in both directions.
Refer to TRIM TAB ADJUSTMENT
on p.76.
SHALLOW WATER
OPERATION
When operating in shallow water, use
the power trim/tilt switch (p.66) to tilt
the outboard motor so that the
propeller and gear case won't hit the
bottom.
Proceed at low speed, and monitor
water flow from the cooling system
indicator (p.36) to be sure the
outboard motor is not tilted so high
that the water intakes are out of the
water.
68°
TILT
ANGLE
16°
0°
(VERTICAL LINE)
TRIM ANGLE
(when transom angle at 12°)
12°
0°
-4°