Emergency Starting - TOHATSU BFT 75A Owner's Manual

Hide thumbs Also See for BFT 75A:
Table of Contents

Advertisement

During the warm-up period, check
the oil pressure indicator (p.35),
overheat indicator (p.35), and
cooling system indicator (p.36).
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
TAKING CARE OF
UNEXPECTED PROBLEMS on
p.115-117.
6. If the fast idle button was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.

EMERGENCY STARTING

If the battery is discharged or the
starter motor is inoperative, you can
start the engine manually using the
emergency starter rope supplied with
the outboard motor.
UNLOCK
ENGINE COVER
LATCHES 
(front/rear)
1. Turn the ignition switch key to the
OFF position (p.62).
2. Unlatch the engine cover latches
and remove the engine cover.
OPERATION
6 × 25 mm
FLANGE BOLT
ALTERNATOR
COVER
6 mm WASHER
CLAMP
HOOKS
CLAMP 
BREATHER
(on the silencer case)
TUBE
3. Release the breather tube from the
four clamps.
4. Remove 6

25 mm flange bolt and
6 mm washer, and then remove the
alternator cover.
CLAMPS
57

Advertisement

Table of Contents
loading

Table of Contents