Connecting The Line Cord; Connecting The Power Adapter - Regency 500 Series User Manual

User's Guide
Using the Features and Options
Redial Key
The REDIAL key is used to
automatically redial the last number
dialed.
To use:
1 Lift the handset, or press the
SPEAKER key.
2 Press the REDIAL key.
3 The number that was last dialed
will automatically be dialed.
In Use Line Indicator
The LED will illuminate to
indicate that another phone is
in use and sharing the same
line.
Regency™ Series 500 Single Line Caller ID Telephone
30
User's Guide
Installing the Telephone

Connecting the line cord

1 If the telephone is to be desk mounted, plug one end of the 7'
line cord into the modular jack at the rear of the telephone.
2 The remaining
end of the line
cord plugs into
the jack located
on the wall.
3 If the telephone is
to be wall
mounted, use the
8" line cord supplied instead. See also page 8 for more
information on wall mounting your telephone.

Connecting the power adapter

The power adapter provides the power source to the telephone.
1 Plug the power adapter into the back of the telephone.
2 Wrap the power wire around the strain relief provided . This will
avoid accidental disconnection of the power cord.
3 Plug the power adapter
into a standard 120V
AC power outlet.
Mounting holes are
provided to secure the
power adapter to the
AC wall outlet.
Regency™ Series 500 Single Line Caller ID Telephone
7