Section 2: Installing The Transmitter Batteries; Section 3: Installing The 7.2V Ni-Mh Battery Packs - Pro Boat Blackjack 26 Brushless Owner's Manual

Section 2: Installing the Transmitter Batteries

Install 8 "AA" alkaline batteries into the
transmitter, following the instructions
provided for your radio system.

Section 3: Installing the 7.2V Ni-MH Battery Packs

Carefully remove the hatch from the hull.
The Pro Boat water-cooled ESC comes
pre-wired with a Deans-style connector.
Use a 6-cell battery pack listed below for
optimum performance.
• PRB3313 7.2V 3600mAh
w/Deans Connector
• PRB3314 7.2V 4200mAh
w/Deans Connectors
You may also remove the Tamiya-style
connector from conventional battery
packs and purchase WSD1303 from your
local hobby shop. Be sure to solder the
connectors to the battery in the proper
polarity.
Pro Boat offers a charge adapter
(PRB3312) to allow you to charge the
PRB3313 and PRB3314 batteries with
Deans connectors with conventional
chargers that use Tamiya-style
connectors.
Follow the instructions included with your
fast charger to ensure a safe charge.
Attach the hook and loop material to the
batteries and the battery boxes. Install
two fully charged 7.2V Ni-MH battery
packs into the hull.
5