You will need to purchase the following to get your boat on the water:
•
4 AA alkaline batteries for the radio transmitter
•
7 .2V Ni-MH Battery Pack with Deans Connector (PRB3316) x2
•
Twin Peak Dual Battery Charger (DYN4033)
•
Tamiya/Deans adapter (PRB3312)
Attach the side stand pieces by interlocking them into the end pieces
as shown . Secure the interlocking pieces with medium CA or epoxy .
Make certain you allow the adhesive to fully cure before placing your
boat on the stand .
Section 2: Installing the Transmitter Batteries
Install 4 AA alkaline batteries into the transmitter, following the
instructions provided for your radio system .
Contents
Additional Required Items
Section 1: Assembling the Boat Stand
•
Assembled Formula FASTech 26 Brushless EP RTR
•
Pro Boat 2 .4GHz pistol-grip radio transmitter
•
Boat stand
4
4
PRB3316
5100mAh