Step 2: Install The New 802.11G Mini-Pci Wireless Card (Nxd); Step 3: Install The New Compact Flash Memory Card (Nxd) - AMX Modero NXT-1200V Operation/Reference Manual

Touch Panel Accessories
DO NOT
REMOVE
these
panel
securing
screws
FIG. 23 Location of the securing screws on an NXD panel
DO NOT REMOVE THE PANEL SECURING SCREWS. These screws secure the
LCD to the metallic casing.
5.
Unscrew the four pan-head Housing Screws from the rear of the NXD unit (FIG. 23) and gently remove
the outer housing. These four screws secure the back box to the internal panel casing.

Step 2: Install the new 802.11g mini-PCI Wireless card (NXD)

1.
Complete the procedures outline within Step 2: Install the 802.11g mini-PCI Wireless Card section on
page 16 and then continue with the following step.

Step 3: Install the new Compact Flash Memory card (NXD)

Complete the procedures outline within Step 3: Install the Compact Flash Memory Card upgrade section on
page 17 and then continue with the following step.
Four Pan-head
Housing
Screws
NXA-PCI80211G
wireless card
FIG. 24 Location of the Compact Flash card and I/O plate on NXD
20
Unscrew these four Housing Screws
to remove the back box. These make direct
contact with the black outer housing.
location
DO NOT REMOVE
these panel
securing screws
Outer Housing
NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
I/O connector
plate
Compact Flash card