Step 4: Close and Resecure the NXD Panel Enclosure
1.
With the components securely installed, gently place the outer housing back onto the metallic panel
casing (with the connector opening on the right-side of the panel) and align the four pan-head Housing
Screw holes along the edges of the outer housing.
Use care not to bend or damage any antenna connections while replacing the outer
housing.
2.
Insert and secure the four pan-head Housing Screws into the pre-drilled holes along the edges of the NXD
unit by using a grounded Phillips-head screwdriver.
3.
Reinstall the I/O connector plate by aligning all connectors to their respective locations.
4.
Secure the I/O connector plate using a grounded Phillips-head screwdriver and then twist the Stereo
Output nut back into the Stereo Output jack.
NXT-BP Power Pack (FG2255-10)
The NXT-BP Power Pack (FIG. 25) is a rechargeable Lithium-Ion "smart" battery used to provide power to the
NXT Modero panel through the NXA-BASE/B Battery Base. This battery incorporates an
on-board battery life indicator. The NXT-BP battery can be charged through either the base (when connected
to the Modero panel) or through an optional NXT-CHG Modero Power Station.
Extra NXT-BP Power Packs can be purchased separately as an optional accessory.
FIG. 25
NXT-BP Power Pack
Product Specifications
NXT-BP Specifications
Dimensions (HWD):
Power (Voltage):
Weight:
Features:
Operating / Storage
Environment:
NXD/T-1200V 12" Modero® Video Wall/Flush Mount Touch Panel
• 0.69" x 3.50" x 5.81" (1.75 cm x 8.89 cm x 14.76 cm)
• 11.1 Volts (nominal)
• Single NXT-BP Power Pack: 1.0 lbs (0.45 kg)
• Battery Usage: 4 to 8 hours (time is usage dependant)
• Charge Capacity: 6300mAh
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage/Discharge Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Touch Panel Accessories
21